Good 41º morning.
Yesterday we had rain and we started at 40º and topped at 60º.
Picture of the Day😄
Interesting about bubble bath.........
A bubble bath is a filled bathtub with a layer of soap bubbles on the surface of the water. Less commonly, aerated or carbonated baths are called bubble baths.
Bubbles on top of the water, less ambiguously known as a foam bath (see photo), can be obtained by adding a product containing foaming surfactants to water and temporarily aerating it by agitation (often merely by the fall of water filling the tub). The practice is popular for personal bathing because of the belief that it cleanses the skin, that the foam insulates the bath water, keeping it warm for longer, and (as a lime soap dispersant) prevents or reduces deposits on the bath tub at and below the water level (called "bathtub ring" and soap scum, respectively) produced by soap and hard water. It can hide the body of the bather, preserving modesty or, in theatre and film, giving the appearance that a performer who is actually clothed is bathing normally. Children often find bubble baths enjoyable, so they are an enticement to get them into the bathtub.
Surfactant preparations for this purpose are themselves called "bath foam", "foaming bath", or "bubble bath", and frequently contain ingredients for additional purposes common to bath enhancers. Used at much higher concentration (for instance on a washcloth), such preparations (especially in liquid format) may also be used to wash skin or hair, so they are sometimes marketed for combined purposes; in a few cases, mild household detergents for hand washing of articles have also been labeled for such purposes, or for preventing soap scum on the bathtub (with or without foaming).
History
The earliest foam baths were foamed with soap, a practice which came about shortly after soap flakes were marketed. Saponins were also used to foam machine-aerated baths. Foam baths became more popular with later surfactants; an early publicized use of an alkyl sulfate surfactant as bath foam was in the original 1936 production of the play The Women, but it is possible that a similar composition was used to produce foams seen in bath photos since the marketing of Dreft in 1933. Foam baths became standard practice for bathing children after the mass marketing of products so positioned in supermarkets during the 1960s and thereabouts, Bub [1] and Matey in the United States having been marketed shortly before 1960. The dubious claim had been made that their normal use (diluted in a tubful of water) would substitute for soap and/or rubbing to clean skin.
Compositions
Preparations to produce a foam bath must be able at high dilution in water of common "hardness" to produce a foam and hold it for a useful duration. This is practically always done primarily by the action of an anionic, nonionic, or zwitterionic surfactant. Among cation surfactants betaines can be used in foam baths, but at their isoelectric point they are incompatible with anionic surfactants. In general cationic surfactants are not used as most of them are not compatible with anionic surfactants and are not good foaming agents. Main function of cationic surfactants is conditioning and are hence used more in personal care products such as shampoos and conditioners. Amphoteric surfactants or zwitterionic surfactants like alkyl amido alkyl amine (CAPB) are used. Typically a mixture of different surfactants is used. Of the anionics, soap is not a common deliberate constituent of bath foam preparations because they react rapidly with "hardness" cations in water to produce lime soaps, which are anti-foams. Usually one or more ingredients is primarily a foam stabilizer—a substance which retards the breakage of foams; these may themselves be surfactants or film-stabilizing polymers. Some surfactants used in foaming preparations may have a combination of foam-producing and foam-stabilizing properties. Surfactants used in bath foam preparations may also be included for primarily non-foaming purposes: solubilization of other components in the manufacturing of a liquid product, or lime soap dispersion to prevent bathtub ring when used with soap.
Bath foam preparations may be in the form of liquid (or gel) with water, or as solids in the form of powders, grains, or tablets. Liquids must be formulated to retain uniformity as solution or otherwise on storage at expected temperatures, and preserved against microbial growth and oxidative breakdown. Powders may contain various solid diluent ingredients which in some cases will have liquid components adsorbed to them, and have their own challenges in terms of retaining uniformity against sifting of different densities of components. For various reasons, although powdered products were more common at first, liquids have come to dominate the market.
Liquid and solid bath foam preparations may also include ingredients for purposes other than foaming, similarly to bath salts and oils. Formulation is also directed at minimizing adverse effects on the skin and exposed mucous membranes of bathers. Sometimes foaming ability is compromised to achieve mildness or non-foaming effects such as emollient.
Aerated and carbonated baths – bubbles in water
Bubbles in the water can be produced either by aerating it mechanically (in some cases using jets that also move the water) using equipment installed permanently or temporarily in a bathtub, hot tub, or pool, or by producing gas in the water in a bathtub through the use of effervescent solids. The latter can come as small pellets known as bath fizzies or as a bolus known as a bath bomb, and they produce carbon dioxide by reaction of a bicarbonate or carbonate with an organic acid. Fizzing bath products came into use as effervescent bath salts early in the 20th century; the bath bomb became a popular form late in that century.
Bath fizzies are infeasible as liquids because of the inability to keep the mixture from reacting prematurely. This is a distinction from foam bath (see above) preparations, which may be supplied as liquids or solids.
Machine-aerated baths originated in the early 20th century for therapeutic use, becoming more widely used with the introduction of the jacuzzi. Trends merged when the hot tub, which originally had still water, with its increasing popularity became more commonly a communal whirlpool bath. By the late 20th century jetted bathtubs had become popular for home installation.
It is possible to produce baths with bubbles simultaneously in and on top of the water (as in a poured beer), but the combination has not been popular. Mechanical aeration of a foam bath may produce much more foam than is sought—the Internet is replete with first hand accounts and sometimes photographs of such experiences—and many mechanically aerated baths are hot tubs which are shared and not drained between uses and so are desired to be kept free of non-maintenance materials. Mechanically aerated baths for tissue debridement of burn victims typically have added anti-foaming agents to counteract the film-forming properties that some medicinal additives have as a side effect, but the anti-foam is sometimes omitted or reduced for children to give them more of a pleasant distraction during debridement. Bath fizzies that also foam tend to produce disappointingly little foam when allowed to do so from their own fizz, and aeration of the water loses the gas from the fizz.
When the term "bubble bath" is encountered on the Internet referring to a gas-infused bath or pool, it is more often by a non-native user of English who may not be aware of its use to refer to foam baths (see above). In other languages the distinction is more likely to be kept by use of different words.
From Mr. Food
These cocktails are delicious, with or without alcohol. Try Zippy Bloody Marys the next time you've got company over.
- 1 (46-ounce) can tomato juice
- 3 tablespoons lime juice
- 1 tablespoon Worcestershire sauce
- 1 tablespoon prepared white horseradish, drained
- 1 teaspoon hot pepper sauce
- 3/4 teaspoon salt
- 1/2 teaspoon black pepper
- 3/4 cup vodka (optional)
- 6 celery stalks, trimmed and cleaned
- Ice cubes
- Lime wedges (optional)
- In a large covered jar or pitcher, combine all ingredients except celery and ice. Shake or mix until evenly blended.
- Place a celery stalk and a few ice cubes in individual tall drink glasses. Pour Bloody Mary mixture over ice, add a lime wedge, if desired, and serve.
***This can be easily doubled or tripled and served in a punch bowl for larger brunch gatherings. And be sure your guests know there's alcohol in it, unless you prefer to leave out the vodka.
Historically this date.......
And births this date include....
All I know. Nuff said. Have a good Tuesday. Ciao.
xo Sue Mom Bobo
On May 7 we are charged with breaking down obstacles on National Barrier Awareness Day. We are responsible for dissolving stigmas that keep people with disabilities from advancing in education. It’s an opportunity to tear down walls and build ramps that will help provide access. Where there are misunderstandings, there is potential for the development of new technology that may bridge the gap. Policies that are antiquated and are preventing those with disabilities from accessing their full potential can be re-assessed. If there was ever a time to speak up about questionable treatment of a human being, National Barrier Awareness Day encourages us to do so now.
“Today some 36 million Americans suffer from some form of handicap. Eighty percent of Americans will experience some disability in their lifetime. That makes it necessary for all of us to understand and appreciate both the barriers they must surmount and the contributions that they can make to our society.
Many disabled people face financial, cultural, and physical barriers because of a lack of public understanding of their needs. We must become more aware of the barriers that prevent or inhibit so many of our fellow Americans from participating fully in the life of our society, and how much more they could contribute if those obstacles were removed….”
Visible and invisible barriers are equally difficult to overcome. With advocacy, education and awareness these obstacles can be lifted, empowering people with disabilities to live more independent fulfilled lives.
HOW TO OBSERVE
Break the barriers and work toward eliminating all of the cultural, employment, legal, and physical obstacles that confront individuals with disabilities! Share your support using #BarrierAwarenessDay.
HISTORY
Proclamation 5472, signed by United States President Ronald Reagan, was released by the Office of the Press Secretary on May 8, 1986, declaring May 7 of 1986 as National Barrier Awareness Day. Since that day, many people across the country have continued to observe National Barrier Awareness Day each year on May 7.
